Sony BVH-2000, Руководство по эксплуатации и обслуживанию

Страница: 315 / 505

(5-6-6. Outline of Remote Control)
Pin-26: OUT 15 (ASSEMBLE STATUS
Low active
(FWD STATUS output): Low active
this is the ASSEMBLY PRESET STATUS
output but when S2-5 on the LG board is set to ON, it
serves as the FWD STATUS output
Pin-27: OUT 17 (EDIT STATUS output): Low active
Pin-28: DTM: Timer data gate pulse
Pin-29: DGN: Time code generator
gate
Pin-30: MP
z
o
~
«
a:
ill
0..
o
LL
o
>-
a:
o
ill
I
r-
LD
which read DATA
1,
and 8 sunnneu
to pins 15, 32, 16 and 17.
Pin-3l: K4
Clock signal which is produced by dividing the clock
pulse supplied to pin -14 down to 128.
(pin-32: DATA-2: See 15)
Pin-33: GND
Pin-34:
command Low active
Pin-35: STOP command input: Low active
Pin-36: REC command input: Low active
Pin-37: SPARE 1 (REW command output): Low active
(AUDIO-l REC control input): Low active
This is the REW command output but
when S2-5 on the LG board is set to ON and the SY -79
board jumper 12 is from A to this serves
as the AUDIO-l REC control input pin.
Pin-38: OUT 11 (AUDIO-2 PRESET STATUS output): Low
active
(AUDIO-2
REC OUT STATUS output):
active
This is normally the AUDIO-2 PRESET STATUS
output pin but when S2-5 on the LG board is set to ON,
this pin serves as the AUpIO-2
REC OUT STATUS
output pin.
Pin-39: OUT 10 (AUDIO-l STATUS Low
active
(AUDIO-l REC OUT STATUS output):
Low active
This is normally the AUDIO-l PRESET STATUS
output but when S2-5 on the LG board is set to ON,
this pin serves as the AUDIO-l REC OUT STATUS
output
Pin-40: SPARE 4 (FF command output): Low active
(AUDIO-2 REC control Low active
This is normally the FF command output pin but when
S2-5 on the LG board is set to ON and the SY -79 board
14 is from to this serves as the
AUDIO-2 REC control input pin.
Pin-41: OUT 13 (SYNC PRESET STATUS Low
active
(AUD-4REC MODE STATUS output): Low
active
This is normally the SYNC PRESET STATUS output
but when S2-5 on the board is set to ON. this
serves as the AUDIO-4 REC MODE STATUS output
pin.
SYSTEM CONTROL SYSTEM
Pin-42: OUT 12 (AUDIO-3 PRESET STATUS Low
active
(AUD-3 REC MODE STATUS output): Low
active
This is normally the AUDIO-3 PRESET STATUS
output but when S2-5 on the LG board is set to ON,
this pin serves as the AUDIO-3 REC MODE STATUS
output pin.
Pin-43: STOP STATUS output: Low active
Pin-44: OUT 14
(VIDEO PRESET STATUS output): Low
active
(REVERSE STATUS command output):
Low active
This is normally the VIDEO PRESET STATUS output
pin but when S2-5 on the LG board is set to ON, the
status command
indicating reverse tape travel is output.
Pin-45: OUT 16 (INSERT PRESET STATUS output): Low
active
(SYNC 6 LACK output): Low active
Normally, this is the INSERT PRESET STATUS
output pin but when S2-5 on the LG board is set to ON,
the SYNC 6 LACK signal, which indicates that the PB
output of the sync channel
has 400}-tsec or
more and, moreover, that this has been continuous for 6
or more fields. is output from this
Pin-46: STANDBY ON status output: Low active
Pin-47: PLAY status output: Low active
Pin-48: REMOTE
OUT
This signal is low when the REMOTE/LOCAL switch is
set to but when the switch is set to
LOCAL.
Pin -49: ALARM OUT
A low signal is output when the VTR is in the alarm
condition.
Pin-50: PREROLL status output: Low active
5-6-10
BVH-2000(U/C)/PS/PM
BVH-2180(U/C)/PS/PM