Sony BVH-2000, Руководство по эксплуатации и обслуживанию

Страница: 27 / 505

z
o
l-
<{
a:
w
0..
o
Operation mode of the VTR
o
*4
&
others
selector
CD
OFF· ON EDIT REC
TAPE TAPE EE
TAPE *1
EE
TAPE
A1, A2
TAPE/EE
INPUT *3
A3 TAPE/EE
: output signal of the AUDIO LINE OVTPUT connectors
l---:~-~~
'--..:--. __ --' : output signal the AUDIO MONITOR OUTPUT connectors
will be attenuated.
*2 If the SW8-5 on the SY-80 board is set to ON, the output will
be muted between the IN and OUT points.
*3 If the SW9-3 on the SY-80 board is set to ON, the E-to-E signal
will modes when
is
E-to-E signal the channel 3 be latched, and the
E-to-E signal
will
be output from the AUDIO OUTPUT and
MONITOR OUTPUT connectors even
if
the TAPE or
TAPEjEE
position is selected afterwards. When the VTR is entered into
the
the will
is
be output.
*6 The E-to-E signal is output from the BVH-2000(OO).
SERVO REF (reference) selector
connected the
INPUT connector
G)
on the video connector
panel (composite video signal) becomes the
reference signal.
video
signal. In the PLAY mode, the external refer-
ence signal becomes the reference signal
(selected automatically).
connected the
on
becomes the reference signal.
• The amount of the sync signal to be advanced neces-
sary for playback can be changed by the ADVANCE
the 7 to
1-17