Sony BVH-2000, Руководство по эксплуатации и обслуживанию

Страница: 247 / 505

2-3. Error/Mode Display by LEOs on R 2 Board)
D4: Servo System Error
If the following error is
LEO
SYSTEM alarm
released,
STOP mode.
1. If the SV/RL/CO/SR board is not correctly inserted
rack the contact
transport and the
SYSTEM alarm lamp will light up and the buzzer
will sound
until repair of the defective part is
When the temperature inside the motor falls to 90°C
or below, the VTR will return to normal.
3. When the previously explained 05 Tape Transport
front
panel will light up, and the buzzer will sound. The
error condition
can be released by slackening the
tension of the and tension arms.
out,
£1.V'''''''-',''''-'£,
the following errors has occurred. Even if an error
occurs, the mode being executed will continue.
1. If the speed during operation deviates at least
JOG, or less than ±3 x normal SHUTTLE).
2. If the PB V phase deviates at least ±20 psec
against the REF V during the 1 x normal
BVH-2000(U/C)/PS/PM
BVH-2180(U/C)/PS/PM
02: Color Framing/S Tension Error
• If the tape becomes abnormally tensed or slackens in
of the side 05,
T
while and are
playback or recording in the color framing mode, the
color framing is normal, and the CF LOCK lamp on
the front
also up.
front such
case, check the setting of the SC ADJ switch on the
SR-15 board. Also, in the case of the playback mode,
confirm that the setting of the CAP LOCK switch
""4F"
FIX:
EXT:
and
CF LOCK lamp will light up, and the VTR
will be placed into the color framing mode.
If the system is locked to the color framing
the CF LOCK lamp will light up.
4-39
z
o
i=
«
~
a:
o
LL
Z
w
U
>
a:
w
(J)