Sony BVH-2000, Руководство по эксплуатации и обслуживанию

Страница: 350 / 505

This section
for
and the
which some
The parts not described
here are in Section 3 or
views in Section D.
Preliminarv Information
If the leads of the VIS erase head are on the harness
holder for the audio/CTL head, the VIS head not be
set in the correct and it may cause double in
the REC mode.
1. Go to the rear of the machine and open the power
and remove the connector
CN383 from the BE-02 boad.
2. Loosen the VIS screw and remove the VIS erase head
3. Remove the harness from the VIS head, then remove
the head. 6-1.)
Note: The spacer will be used
4. After the head, assemble the parts in the reverse
order of step 3.
5. Solder the harness to the head. (See 6-2.)
6. Mount the V
IS
erase head in the order of steps 2 and 1.
7. Connect the connector CN383 to the BE-02 board.
8. Turn the motor with a flat-blade screwdriver to
close the slant and make sure that the leads of the
VIS erase head are not caught on the harness holder.
9. Check the of the VIS erase head, to
Section 3-24-12.
BVH-2000(U/C)/PS/PM
BVH-2180(U/C)/PS/PM
BVH-2500( U/C)/P
~
z
w
~
w
u
<t
-'
o,
w
0:
cD
6-1.
v
IS
Erase Head
Henlacernent
White Blue
Red
6-2.
6-1