SonicWALL TELE3 SP, Руководство администратора

Страница: 92 / 210

Advanced Features Page 91
to the WAN link . That way, you only have to enter one or two IP addresses in the Add Range
section. Specify the IP addresses individually or as a range.
Intranet Settings
Select one of the following four options:
• SonicWALL WAN link is connected directly to the Internet router
Select this option if the SonicWALL is protecting your entire network. This is the default
setting.
• Specified address ranges are attached to the LAN link
Select this option if it is easier to specify the devices on your LAN. Then enter your LAN IP
address range(s). If you do not include all computers on your LAN, the computers not
included are unable to send or receive data through the SonicWALL.
• Specified address ranges are attached to the WAN link
Select this option if it is easier to specify the devices on your WAN. Then enter your WAN
IP address range(s). Computers connected to the WAN port that are not included are
inaccessible to users on your LAN.
• Add Range
To add a range of addresses, such as "199.2.23.50" to "199.2.23.54", enter the starting
address in the
From Address field and the ending address in the To Address field. An
individual IP address should be entered in the From Address field only.
Note : Up to 64 address ranges can be entered.
Click Update . Once the SonicWALL has been updated, a message confirming the update is
displayed at the bottom of the browser window.