SonicWALL TELE3 SP, Руководство администратора

Страница: 23 / 210

Page 22 SonicWALL TELE3 SP Administrator’s Guide
the Time window, click Update . Once the SonicWALL has been updated, a message
confirming the update is displayed at the bottom of the browser window.
Setting the Administrator Password
To set the password, enter the old password in the Old Password field, and the new password
in the New Password field. Enter the new password again in the Confirm New Password
field and click Update . Once the SonicWALL has been updated, a message confirming the
update is displayed at the bottom of the browser window.
Note : When setting the password for the first time, remember that the SonicWALL default
password is “password”.
If the password is not entered exactly the same in both New Password fields, the password
is not changed. If you mistype the password, you are not locked out of the SonicWALL.
Warning : The password cannot be recovered if it is lost or forgotten. If the password is lost,
you must to reset the SonicWALL to its factory default state. Go to Appendix F for instructions.
Setting the Administrator Inactivity Timeout
The Administrator Inactivity Timeout setting allows you to configure the length of
inactivity that can elapse before you are automatically logged out of the Web Management
Interface. The SonicWALL is preconfigured to log out the administrator after 5 minutes of
inactivity.
Note : If the Administrator Inactivity Timeout is extended beyond 5 minutes, you should end
every management session by clicking Logout to prevent unauthorized access to the
SonicWALL Web Management Interface.
Enter the desired number of minutes in the Administrator Inactivity Timeout section and
click Update . The Inactivity Timeout can range from 1 to 99 minutes. Click Update , and a
message confirming the update is displayed at the bottom of the browser window.