Page 86 SonicWALL TELE3 SP Administrator’s Guide
To enable secure remote management, click
Access
on the left side of the browser window,
and click the
Management
tab. Then select
Managed: "from the LAN interface and
remotely from the WAN interface"
to enable secure remote management.
When remote management is enabled, a
Management SA
is automatically generated. The
Management SA
uses Manual Keying to set up a VPN tunnel between the SonicWALL and the
VPN client. The
Management SA
also defines
Inbound
and
Outbound Security
Parameter Indices (SPIs)
which match the last eight digits of the SonicWALL serial number.
The preset SPIs are displayed in the
Security Association Information
section. It is not
necessary to configure a VPN connection for
Remote Management
as the
Management SA
is automatically configured in this section.
1. Enter a 16-character hexadecimal encryption key in the
Encryption Key
field. Valid
hexadecimal characters include 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E and F. An example
of a valid encryption key is 1234567890A-BCDEF. Or you can use the randomly generated
key that appears in the
Encryption Key
field.
2. Enter a 32-character hexadecimal authentication key in the
Authentication Key
field. An
example of a valid authentication key is 1234567- 890ABCDEF1234567890ABCDEF. Or you
can use the randomly generated key that appears in the
Authentication Key
field.
3. Click
Update
. Restart the SonicWALL for the change to take effect.
Note
: When a
Management SA
is created, the remote SonicWALL is managed at the
SonicWALL WAN IP Address.
4. Click
Help
in the upper right corner of the SonicWALL Management Interface to access
detailed instructions for configuring the VPN client. Additional instructions are available at
<http://www.sonicwall.com/products/documentation/VPN_documentation.html>.
Содержание TELE3 SP
Страница 1: ...SONICWALL The TELE3 SP Administrator s Guide...
Страница 204: ...Appendices Page 203 Notes...
Страница 205: ...Page 204 SonicWALL TELE3 SP Administrator s Guide...
