Page 163
Configuring High Availability on the Primary SonicWALL
Click
High Availability
on the left side of the SonicWALL browser window, and then click
Configure
at the top of the window.
The top half of the window displays the primary SonicWALL serial number and network settings.
The bottom half of the window displays the backup SonicWALL information boxes. To configure
High Availability
, follow the steps below:
1. Connect the primary SonicWALL and the backup SonicWALL to the network, but leave
the power turned off on both units.
2. Turn on the primary SonicWALL unit and wait for the diagnostics cycle to complete.
Configure all of the settings in the primary SonicWALL before configuring
High
Availability
.
3. Click
High Availability
on the left and begin configuring the following settings for the
primary SonicWALL:
•
LAN IP Address
- This is a unique IP address for accessing the primary SonicWALL from
the LAN whether it is
Active
or
Idle
.
Note
: This IP address is different from the IP address used to contact the SonicWALL in the
General Network settings.
•
WAN IP Address (Optional)
- This is a unique WAN IP address used to remotely manage
the primary SonicWALL whether it is
Active
or
Idle
.
Note
: The
Synchronize Now
button is used for diagnostics and troubleshooting purposes
and is not required for initial configuration.
Содержание TELE3 SP
Страница 1: ...SONICWALL The TELE3 SP Administrator s Guide...
Страница 204: ...Appendices Page 203 Notes...
Страница 205: ...Page 204 SonicWALL TELE3 SP Administrator s Guide...