General and Network Settings Page 19
When your SonicWALL has successfully received a DHCP lease, the
Network
window displays
the SonicWALL WAN IP settings.
• The
Lease Expires
value shows when your DHCP lease expires.
• The
WAN Gateway (Router) Address,
SonicWALL WAN IP (NAT Public) Address
,
WAN/LAN Subnet Mask
, and
DNS Servers
are obtained from a DHCP server on the
Internet.
Note
: The SonicWALL does not relay DNS settings to the LAN; you must enable and configure
the SonicWALL DHCP server or manually configure DNS settings on your computers to obtain
DNS name resolution.
In the
WAN/LAN Settings
section of
Network
, you can
Renew
and
Release
the
SonicWALL WAN IP (NAT Public) Address lease. When you click on
Renew
, the SonicWALL
renews the IP address used for the WAN IP address. Click
Release
, and the lease is released
with the DHCP server.
NAT with PPPoE Configuration
The SonicWALL can use Point-to-Point Protocol over Ethernet to connect to the Internet. If your
ISP requires the installation of desktop software and user name and password authentication
to access the Internet, enable
NAT with PPPoE
.
To configure
NAT with PPPoE
, complete the following instructions.
1. Select
NAT with PPPoE
from the
Network Addressing Mode
menu.
Содержание TELE3 SP
Страница 1: ...SONICWALL The TELE3 SP Administrator s Guide...
Страница 204: ...Appendices Page 203 Notes...
Страница 205: ...Page 204 SonicWALL TELE3 SP Administrator s Guide...