Page 106 SonicWALL TELE3 SP Administrator’s Guide
minutes for the temporary lease in the
Temporary Lease
Time
box. The default value is
two (2) minutes.
LAN Device Configuration
8.
To configure
Static Devices on the LAN
, enter the IP address of the device in the
IP
Address
field. Then enter the Ethernet Address of the device in the
Ethernet
Address
field. An example of a static device is a printer as it cannot obtain an IP lease dynamically.
If you do not have
Block traffic through tunnel when IP spoof detected
enabled, it
is not necessary to enter the Ethernet address of a device.
9.
You must exclude the Static IP addresses from the pool of available IP addresses on the
DHCP server so that the DHCP server does not assign these addresses to DHCP clients.
10.
Select
LAN Devices not allowed to obtain IP through SA
if there are devices on the
LAN that you do not want to obtain IP addresses through the VPN tunnel, such as children’s
computers. You must know the Ethernet address of the device to configure this setting.
The Ethernet address of a device can be determined by typing
ipconfig/all
into a
Command Prompt
window.
Note
: You must configure the local DHCP server on the remote SonicWALL to assign IP leases
to these computers.
Note
: If a remote site has trouble connecting to a central gateway and obtaining a lease, verify
that Deterministic Network Enhancer (DNE) is not enabled on the remote PC.
Содержание TELE3 SP
Страница 1: ...SONICWALL The TELE3 SP Administrator s Guide...
Страница 204: ...Appendices Page 203 Notes...
Страница 205: ...Page 204 SonicWALL TELE3 SP Administrator s Guide...