Page 16 SonicWALL TELE3 SP Administrator’s Guide
When NAT is enabled, users on the Internet cannot access machines on the LAN unless they
have been designated as Public LAN Servers.
To enable
Network Address Translation (NAT)
, complete the following instructions.
1. Select
NAT Enabled
from the
Network Addressing Mode
menu in the
Network
window.
2. Enter a unique IP address from your LAN address range in the
SonicWALL LAN IP
Address
field. The SonicWALL LAN IP Address is the address assigned to the SonicWALL
LAN and is used for management of the SonicWALL.
3. Enter your network subnet mask in the
LAN Subnet Mask
field. The
LAN Subnet Mask
tells the SonicWALL which IP addresses are on your LAN. Use the default value,
"255.255.255.0", if there are less than 254 computers on your LAN.
4. Enter your WAN router or default gateway address in the
WAN Gateway (Router)
Address
field. This is the device that connects your network to the Internet. If you use
Cable or DSL, your WAN router is probably located at your ISP.
5. Enter a valid IP address assigned by your ISP in the
SonicWALL WAN IP (NAT Public)
Address
field. Because NAT is enabled, all network activity appears to originate from this
address.
6. Enter your WAN subnet mask in the
WAN/LAN Subnet Mask
field. This subnet mask
should be assigned by your ISP.
Содержание TELE3 SP
Страница 1: ...SONICWALL The TELE3 SP Administrator s Guide...
Страница 204: ...Appendices Page 203 Notes...
Страница 205: ...Page 204 SonicWALL TELE3 SP Administrator s Guide...