Network Access Rules Page 75
2. Click the
Rules
tab, and click
Add New Rule...
.
3. Select
Allow
, then
Web (HTTP)
from the
Service
menu.
4. Select
WAN
from the
Ethernet Source
menu, and leave the
Addr Range Begin
and
Addr Range End
as they appear.
5. Select
LAN
from the
Ethernet Destination
menu, and type in the IP address of the Web
server, 208.5.5.5 in the
Addr Range Begin
field. No IP address is added in the
Addr
Range End
since the destination is not a range of IP addresses.
6. Select
always
from the
Apply this rule
menu.
7. Enter a value (in minutes) in the
Activity Timeout in Minutes
field.
8. Do not select the
Allow Fragmented Packets
check box.
9. If you want the Rule to have guaranteed bandwidth, select
Enable Outbound
Bandwidth Management
, and enter values for
Guaranteed Bandwidth
,
Maximum
Bandwidth
, and
Bandwidth Priority
.
10. Click
Update
to add the rule to the SonicWALL.
Note
: The source part (WAN or LAN) can be limited to certain parts of the Internet using a
range of IP addresses on the WAN or LAN. For example, the following rule can be used to
configure the same Web server to be only visible from a single C class subnet on the Internet:
Allow HTTP, Source WAN 216.77.88.1 - 216.77.88.254, Destination LAN 208.5.5.5.
Содержание TELE3 SP
Страница 1: ...SONICWALL The TELE3 SP Administrator s Guide...
Страница 204: ...Appendices Page 203 Notes...
Страница 205: ...Page 204 SonicWALL TELE3 SP Administrator s Guide...