DHCP Server Page 101
Enable DHCP Server
To configure the SonicWALL DHCP server for the LAN, complete the following instructions.
1.
Select the
Enable DHCP Server
.
Note
: Make sure there are no other DHCP servers on the LAN before you enable the DHCP
server.
2.
Enter the maximum length of the DHCP lease in the
Lease Time
field. The
Lease Time
determines how often the DHCP Server renews IP leases. The default Lease Time is 60
minutes. The length of time can range from 1 to 9999 minutes.
3.
If configuring DHCP server for the LAN, enter the gateway address used by LAN computers
to access the Internet in the
LAN Default Gateway
field. Enter the SonicWALL LAN IP
Address if NAT is enabled.
4.
If configuring DHCP server for the LAN, enter the gateway address used by LAN computers
to access the Internet in the
LAN Default Gateway
field. Enter the SonicWALL LAN IP
Address if NAT is enabled.
5.
Enter the domain name registered for your network in the
Domain Name
field. An
example of a domain name is "your-domain.com". If you do not have a domain name, leave
this field blank.
6.
Select
Set DNS Servers using the SonicWALL Network settings
to use the DNS
servers that you specified in the SonicWALL
Network
section.
If you wish to use different DNS servers than the ones specified in the SonicWALL
Network
section, then select
Specify
Manually
. Enter your
DNS Server
addresses in the
DNS Server
1
,
DNS Server 2
, and
DNS Server 3
fields. The DNS servers are used by computers on your
LAN to resolve domain names to IP addresses. You only enter one DNS Server address, but
multiple DNS entries improve performance and reliability.
7.
Enter your
WINS Server
address(es) in the
WINS Server 1
and
WINS Server 2
fields.
WINS Servers
resolve Windows-based computer names to IP addresses. If you do not
have a WINS server, leave these fields blank.
8.
Dynamic Ranges
are the ranges of IP addresses dynamically assigned by the DHCP
server. The
Dynamic Ranges
should be in the same subnet as the SonicWALL LAN IP
Address.
9.
Enter the beginning IP address of your
LAN IP address
range in the
Range Start
field.
Enter the ending IP address in the
Range End
field. Select the
Allow BootP clients to
use range
check box if you want BootP clients to receive IP leases. Then click
Update
.
When the SonicWALL has been updated, a message confirming the update is displayed at
the bottom of the browser window. Continue this process until you have added all the
desired dynamic ranges.
10.
Enter the beginning IP address of your
LAN IP address
range in the
Range Start
field.
Enter the ending IP address in the
Range End
field. Select the
Allow BootP clients to
use range
check box if you want BootP clients to receive IP leases. Then click
Update
.
Содержание TELE3 SP
Страница 1: ...SONICWALL The TELE3 SP Administrator s Guide...
Страница 204: ...Appendices Page 203 Notes...
Страница 205: ...Page 204 SonicWALL TELE3 SP Administrator s Guide...