9
• Always use melting fuses with the proper values. When replacing a fuse,
make sure that the new fuse has the same nominal value as the one you are
replacing. Using a different fuse can cause fire or damage.
• Do not block the player’s cooling vents, as that can cause its circuits to
overheat, resulting in fire. Install the player properly to ensure adequate
ventilation. The air vents around the edge must be left free.
• Make sure to connect the player correctly. Incorrect connections can result fire
or other defaults.
• Prior to wiring/installation, be sure to remove the car battery’s negative
terminal connection! This will prevent any electric shock, short circuit or
malfunction.
• While installing the player never cut through cables or damage their
insulation. Doing so can result in short circuit and fire!
• Before drilling holes or inserting screws into your vehicle’s body make
sure you do not damage tubes or electric wires on the other side of the
cover…
• Do not connect to any electric systems of your vehicle that operate steering,
brakes, or any other safety function. Doing so can result in loss of control over
the vehicle, and can cause fire.
• Do not install the player or its accessories in a location where they can prevent
you from controlling the vehicle safely, e.g., between the steering wheel and
the gear shift.
• Make sure that wires do not coil around neighbouring objects. Arrange
cables and wires in a way that does not hinder you in driving. Wires that
interfere with your movement or hang over the gear shift, the brake etc.
can be extremely dangerous. (E.g., the connection cable of a media player
connected to the USB port)
• In case of any malfunction, turn of the player immediately, and consult your
distributor. Many malfunctions are very easy to detect (e.g., no sound, bad
smell, smoke, an external object inside the product etc.).
• Make sure that no external objects get into the USB socket or the memory
card slot, as these can cause fatal damage.
• Protect it from dust, damp, liquids, heat, moisture, frost and impact, as well
as direct heat or sunlight!
• When leading the connection cables make sure that their insulation does not
get damaged by any sharp metal objects nearby!
• Do not connect any cables when the device is working. Never turn on
the system with the volume at the maximum level! Cracking or other
noise impact occurring that time can immediately damage the speakers
irreparably!
• Speakers contain magnets, so do not place such objects near them, which are
sensitive to them (e.g.: bank card, compass, watch…)
• The warranty is not applicable to damage caused by irresponsible or
improper installation or use!
• Somogyi Elektronic Ltd. certifies that VB P1000 radio equipment conforms
to directive No. 2014/53/EU. Full text of EU Declaration of Conformity is
available on the following link: www.somogyi.hu
• Due to continuous improvements, the technical data and design may change
without any prior notice.
• We don’t take the responsibility for printing errors which may occur, and
apologize for them.
PRECAUTIONS
CLEANING
Use a soft, dry cloth and a brush for regular cleaning. To remove stronger
stains, wet the cloth slightly with water. Avoid scratching the display’s surface;
never wipe the display when it is dry, and do not use a rough cloth to clean
the display. Do not use detergents! Make sure no liquid gets inside the product
or onto the connectors!
TEMPERATURE
Before turning on the player make sure that the temperature inside the car is
between 0°C and +40°C, as the product is only guaranteed to operate properly
within this temperature range. Extreme weather conditions can damage the
product.
LOCATION AND INSTALLATION
When installing the product, make sure it will not be exposed to any of the
followings:
- direct sunlight or heat (e.g. from the heating system), - moisture, high
humidity, - a significant amount of dust, - strong vibration
Warning!
Manufacturer doesn’t take responsibility for lost or damaged
data, even if these data have been lost during the use of this product. It is
recommended to make a safety copy about the data, tracks –located on the
data storage- to your personal computer.
INSTALLATION (ONLY A SPECIALIST CAN INSTALL THE
DEVICE!)
• Depending on the vehicle’s design, additional metal straps or other means
of fastening may be required. The manner of installation may differ from the
instructions depending on the vehicle model!
• Connect the unit’s wiring according to the instructions. Inspect the
connectors in the vehicle for suitability according to the wiring instructions
in this manual. Make sure that the connections are properly made and free
of short circuits. The speaker wiring should be conducted properly!
• It is prohibited to connect any of the speaker wires to the vehicle’s or battery’s
negative terminal/grounding point! (e.g. black power cable or metal point on
the vehicle)
• In order to protect audio system from external noises:
- Locate the device and lead the cables at least 10 cm far from the car
dashboard- cables.
- Keep the battery power cables as far from any others as you can.
- Grounding cable should be connected securely to a clean surface of the car
chassis, free from paint, dirt and grease.
- Make it as far as possible from the unit, in case of noise reduction
connection.