Page 24
Cross Cable Door Support (Installed on Door frame)
Turnbuckle is mounted to this eye bolt on this fitting for a door
that opens from the right side (as you face the door). For a door
opening from the left (As you face the door) you would have the
turnbuckle mounted on the upper elbow on the right side, to the
eye bolt that pinches the side door tube.
C
You will now connect the other end of this cable.
The cable will pass over the
top of the cross bar of the door
. Run the cable through the 2nd cable clamp,
through the eye bolt and then back through the cable clamp. Using a pair of
Pliers, tighten the two nuts on the cable clamp so that it pinches the two sec-
tions of the cable together creating a loop that is going through the eye bolt of
the metal elbow. See picture to the right.
Turnbuckle
Cable Clamp
Cable Clamp
Cross Bar
