Vega-MV Router Multiviewer - User Manual
Issue 1 Revision 2
Page 250
© 2017 SAM
Configuring Audio Metering
Audio Input Channel Numbering E.2
E.2 Configuring Audio Metering
This section describes configuring audio metering for a Vega-MV Router Multiviewer.
To create a layout that only contains the channels that exist (1-32 and 65-96), the fastest
method is to edit the tile and use the Multi-channel metering option as shown below. This will
create a single audio tile displaying all the audio channels that exist in the system.
1.
Select the tile to be edited.
2.
Right click on the tile, select
Edit Object
>
Properties
tab >
Audio
sub tab.
3.
Tick the
Multi-channel metering
tick box and select
Pair 1 Audio source
as
Channel 1+2 as shown in the previous figure.
4.
Tick
Show all remaining pairs
to show all of the audio channels present in the
system.
Figure 164 Multi-Channel metering