manualshive.com logo in svg

Snell VEGA-16MV, Руководство пользователя, Страница: 144 / 260

Поделиться
Скачать
Snell VEGA-16MV Скачать руководство пользователя страница 144

Vega-MV Router Multiviewer - User Manual  

Issue 1 Revision 2

Page 144

© 2017 SAM

   

Object Menu 

Web Interface  7.6 

Example 1

: 

Trigger the timer to start at 10.00am, stop at 10.30am and countdown beforehand. 

•

Set the timer mode to 

Start at a certain time of day

, set the 

Start at

 and 

Stop at

 

times to 10:00:00 and 10:30:00 respectively. 

•

Tick  the 

Countdown first

 box. If the current time is 9:45am then the timer will 

now be displaying 00:15:00, and be counting down. It will currently be white, 
assuming the default colors are set. 

•

When the time of day is 10 seconds before 10am the timer will change color to 
orange and be displaying 00:00:10. 

•

When 10am is reached it will switch to red and start counting up from 00:00:00. 

•

When 10:30am is reached it will be displaying 00:30:00. Immediately after that it 
will change back to white and start counting down from 23:30:00 - the amount of 
time remaining before 10am the next day.

Setting

Description

Stop at

Only available if the Timer Mode is set to 

Start at a certain time of day

 at the top of 

the Timer tab. 

Stop at (hh:mm:ss)

 - sets the time of day the timer will stop at. 

Where 

hh

 = Hours in 24 hour format

mm

 = Minutes

ss

 = Seconds

Font, Font Size

The font to use for the digits. If the size is set to auto then the digits will be sized to fit in 
the window, up to a certain maximum font size.

Countdown Colour

Start at a certain time of day

 Timer Mode: this is the color of the timer digits before the 

Start at

 time is reached. 

Control with GPIs

 Timer Mode: this is the color of the timer digits while the GPI has 

not triggered the timer and while it is counting down.

Transition Colour

Start at a certain time of day

 Timer Mode: this is the color of the timer digits for the 10 

seconds before the 

Start at 

time is reached. 

Control with GPIs

 Timer Mode: if the timer is only set to count up then this is not 

applicable. If 

Countdown First

 is ticked then it will change to the transition color for the 

10 seconds before it reaches 00:00:00.

Destination Colour

Start at a certain time of day

 Timer Mode: this is the color of the timer digits while the 

time of day is in between the 

Start at

 time and 

Stop at

 time. 

Control with GPIs

 Timer Mode: 

•

Countdown first

 ticked: this is the color of the timer digits after the timer has 

finished counting down. 

•

Countdown first

 not ticked: this is the color that the timer changes to as soon 

as the GPI triggers it.

Background Colour

Color of the filled background.

Table 57 Edit Object - Properties - Timer Sub-Tab (Continued)

Содержание VEGA-16MV





































































































































































































































































Отзывы:

Нет отзывов