Smiths Graseby 3200, Техническое и сервисное руководство

Страница: 84 / 117

Smiths Medical International Ltd.
Issue 5 (August 2004)
3200 Service Manual 6 - 1
CHAPTER 6
FUNCTIONAL TESTS and MANUFACTURING SETTINGS
Functional tests
The following functional tests have been designed to verify that the 3200 is safe to use.
Complete the tests before putting the pump into service for the first time, and then as
required.
Functional
tests
Table 6.1 Functional tests
Step Test Method Correct result
1 Mechanical Before applying power to the unit, No damage.
inspection. check that the case and exposed
mechanical parts are free from any
damage.
2 Electrical safety For routine electrical safety testing, Smiths Medical recommends that units
tests are test tested in accordance with the UK Medicine and Healthcare products
Regulatory Authority (MHRA) guideline document MDA DB9801, supplement 1
(December 1999) for Class II, Type CF equipment as a minimum.
3 Initial power on. Connect the AC supply. The AC LED lights.
Press ON . A bleep is heard and all LEDs
are briefly illuminated.
Following this bleep the syringe
type is displayed. The pump
then goes into its set-up mode
and the
STOP and AC LED’s are lit.
4 Syringe sizes. Perform with plunger clamp 40 mm
from RHS and also at extreme LHS.
Insert the following rods (in turn)
into the syringe trough.
11.2 mm. Invalid syringe condition.
12.5 to 15.0 mm. 5ml LED illuminated.
16.2 to 18.2 mm. 10ml LED illuminated.
21.0 to 23.0 mm. 20ml LED illuminated.
23.7 to 26.8 mm. 30ml LED illuminated.
29.0 to 33.1 mm. 50/60ml LED illuminated.
Note:
Smiths Medical manufacture a set of 18 Syringe Size Sensor gauges, part number 0131-0202 (see Appendix,
page A-5). The Smiths Medical Customer Care Department is able to take orders for these gauges and will
supply the current price. This set of gauges enables test No. 4 to be carried out on all of the Graseby 3000
Series of pumps.
(contd.)