Smiths Graseby 3200, Техническое и сервисное руководство

Страница: 89 / 117

Smiths Medical International Ltd.
3200 Service Manual
Issue 5 (August 2004)
6 - 6
Manufacturing settings
When the tests of Table 6.1 have been completed, the pump can be returned to the manufacturing
settings (if required) as shown in sequence in Table 6.2.
The settings marked with an asterisk ( * ) in Table 6.2 are intermediate settings that are initially
selected in order to allow several other associated settings to appear in the Configuration
mode. Ultimately, the final sequence of Manufacturing settings are selected as shown in the
latter part of
Table 6.2.
Manufacturing
settings
Option Setting
Configuration mode:
1 Syringe type BD PLASTIPAK
2 Syringe size NOT LOCKED
3 Lock program values NO
4 Max infusion rate 200 ml/h
5 Select pump modes ALL MODES AVAILABLE *
6 Preset volume mode with time YES
7 KVO Rate 0.5 ml/h
8 Allow mass units option YES *
9 Infusion units mg/kg/h YES
10 Infusion units mg/kg/min YES
11 Infusion units µg/kg/h YES
12 Infusion units µg/kg/min YES
13 Infusion units mg/h YES
14 Infusion units µg/h YES
15 Show rate in ml/h while infusing YES
16 Use pressure transducer YES
17 Display pressure bargraph YES
18 Allow bolus while running NO
19 Allow rate change while running NO
20 Intermittent mode start delay YES
21 RS232 baud rate 9600
22 Communication mode NONE
23 Pump ID GRASEBY_3200 (see Note over page)
24 Set key beep volume 5
25 Pressure units mmHg
Setup mode:
1 Infusion mode INTERMITTENT *
2 Dose volume 0.2 ml
3 Dose duration STAT
4 Dose cycle time 4 hours 0 minutes
5 Background rate 0.00 ml/h
6 Start delay 0 hours 0 minutes
7 Pressure limit 75 mmHg
8 Infusion mode PRESET VOLUME *
9 Infusion rate 1.0 ml/h
10 Preset volume 0.2 ml/h
11 Infusion mode CONTINUOUS
12 Infusion units mg/kg/h *
13 Patient body weight 0.40 kg
14 Drug mass 1.0 mg
15 Drug volume 60 ml
16 Infusion rate 0.01 mg/kg/h
17 Infusion units ml/h
(contd.)
Table 6.2 Manufacturing settings