SMC Networks HRSH090 Series, Руководство по эксплуатации

Страница: 174 / 194

HRX-OM-R026
Chapter 9 Documents
9.1 Specifications HRSH Series
9-2
9.1.2 HRSH090-A

-40-

Table 9-2 Specifications [HRSH090-A

-40-

]
Model HRSH090-A

-40-

Cooling method Air-cooled refrigerated type
Refrigerant R410A (HFC) (GWP1975)
Control method PIDcontrol
Ambient temperature

1 o
C 5 to 45
Circulating
fluid
system
Circulating fluid

2
Tap water, Ethylene glycol aqueous solution 15%
Operating temperature range

1
o
C 5 to 40
Cooling capacity

3
kW 9.5
Heating capacity

4
kW 2.5
Temperature stability

5 o
C ±0.1
Pump
capacity
Rated flow rate
(Outlet)
L/min 45 (0.5MPa)
Maximum flow rate L/min 60
Maximum lifting
height
m 50
Settable pressure range

6
MPa 0.1 to 0.5
Minimum operating flow rate

7
L/min 20
Tank capacity L 18
Circulating fluid outlet, circulating fluid
return port
Rc1 (Symbol F: G1, Symbol N: NPT1)
Tank drain port Rc1/4 (Symbol F: G1/4, Symbol N: NPT1/4)
Wetted material

10
Stainless, Copper(
Heat exchanger’s brazing ), Bronze, Brass, Carbon,
Ceramic, PE, PVC, POM, PTFE, NBR, EPDM, FKM, PP
Electric
system
Power supply
AC380-415V 50/60Hz 3phase
Allowable voltage fluctuation ±10% (No continuous voltage fluctuation)
AC460-480V 60Hz 3-phase
Allowable voltage fluct4%,
–10%
(Max. voltage less than 500 V and no continuous voltage fluctuation)
Recommended
earth
leakage
breaker

8
Rated
current
A 20
Sensitivity mA 30
Rated operating current

5
A 8
Rated power
consumption

5
kW (kVA) 5.0 (5.6)
Sound level (F ront 1m / Height 1m)

5
dB(A) 66
Accessory
Alarm cord list label 2pc.(English 1pc./Japanese 1pc.), Operation manual
2pc. (English 1pc./Japanese 1pc.),
Y strainer (40 meshes) 25A, Barrel nipple 25A
Anchor brackets 2pcs.(including M10 bolts 4pcs.)

9
Weight

(dry condition) kg Approx.130

1 Use 15% ethylene glycol aqueous solution if operating in a place where the circulating fluid temp. or ambient temperature is lower than
10
o
C

2 Use fluid in condition below as the circulating fluid.
Tap water: Standard of The Japan Refregeration And Air Conditioning Industry Association (JRA GL-02-1994)
15% ethylene glycol aqueous solution: diluted by tap water in condition above without any additives such as antiseptics.
Deionized wate: Conductivity 1
μS/cm and higher (electrical resistivity 1MΩ ・
cm and lower)

3 (1)Operating ambient temp.: 32
o
C, (2)Circulating fluid : Tap water, (3)Circulating fluid temp.: 20
o
C, (4)Criculating fluid flow rate : Rated
flow rate, (5)Power supply: AC400V

4 (1)Operating ambient temp.: 32
o
C, (2)Circulating fluid : Tap water, (3)Criculating fluid flow rate : Rated flow rate, (4)Power supply:
AC400V

5 (1)Operating ambient temp.: 32
o
C, (2)Circulating fluid : Tap water, (3)Circulating fluid temp.: 20
o
C, (4)Heat load : Same as the cooling
capacity, (5)Circulating fluid flow rate: Rated flow rate, (6)Power : AC400V, (7) External piping length: Minimum.

6 With the pressure control mode of the pump operation mode. When the pressure control mode is not necessary, use the frequency set
mode

7 Fluid flow rate to maintain the cooling capacity. If the actual flow rate is lower than this, please install a bypass piping.

8

A specified earth leakage breaker is installed for HRSH090-A

-40-

.

9

The anchor brackets (including M10 bolts) are used for fixation with the skid when this product is packed. The anchor bolts are not
attached.

10 Copper, bronze and brass is not included when option M [ DI water (pure water) piping] is selected.