SMC Networks HRSH090 Series, Руководство по эксплуатации

Страница: 38 / 194

HRX-OM-R026
Chapter 3 Transport and Setting Up
3.3 Installation HRSH Series
3-18
Table 3-6 Power supply, contact specifications
Name Terminal NO. Specification
Power supply output
5, 6, 7 (DC 24V)
DC 24V ±10% 500mA MAX

1
13,14, 15 (24V COM)
Contact input signal 1
3 (Contact input signal 1)
-Run/stop signal
input
-External switch
signal input

2
Switch the
input on the
operation
display panel.
Refer to the
operation
manual
communication
function.
11 (Common of contact output signal 1)
Contact input signal 2
4 (Contact input signal 2)
-Run/stop signal
input
-Remote signal
input
-External switch
signal input

2
12 (Common of contact output signal 2)

1:
To use the power of the device, the total load current must be 500mA or less.
If the load is 500mA or more, the internal fuse will be cut to protect the product and the alarm [AL21 DC
line fuse cut] will be generated. Refer to Chapter 6 for handling of alarms.

2: Refer to 3.3.6 Wiring of external switch signal input.
1.
Prepare the switch (source voltage: 24V, contact capacity: 35mA or more, min. load
current: 5mA), and cable (Table 3-5 Signal cable).