SMC Networks HRSH090 Series, Руководство по эксплуатации

Страница: 144 / 194

HRX-OM-R026
Chapter 5 Display and setting of various functions
5.21 Communication function HRSH Series
5-82
50.
Select contact output signal 1 selected alarm from the table below with [
▲] key or [▼]
key, and confirm by pressing “SEL”.
Table 5.21-26 List of set value
Set value Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
function setting of digial output 1 is selected
alarm status signal.
to
Sets selection alarm.
Set range is AL.01 to AL.48.
Contact output signal 2 function Setting and checking
51.
Press the [SEL] key once.
The set screen of contact output signal 2 functions are displayed on the digital display.
52.
Select contact output signal 2 function from the table below with [
▲] key or [▼] key, and
confirm by pressing “SEL”.
Table 5.21-27 List of set value
Set value Explanation
Initial value
(Default setting)
Without signal output
Operation status signal output
Remote status signal output

Ready completion (TEMP READY) signal output
Operation stop alarm signal output
Operation continuation alarm signal output
Alarm status signal output
Selected alarm status signal output
Operation start timer setting status signal output
Operation stop timer setting status signal output
Recovery from power failure setting status signal output
Anti-freezing setting status signal output
Contact input signal 1 pass through signal output
Contact input signal 2 pass through signal output
Warming up function setting status output
Signal output during automatic fluid filling
PV
SV