SMC Networks AMS20, Руководство по эксплуатации

Страница: 87 / 137

-86-
No.PF
※※
-OMA1007
■ [F90] Setting of all functions
Each time the SET button is pressed, the function steps in the order shown in the following table.
<Operation>
Display [F90] by pressing the UP or DOWN button in function selection mode.
Press the SET button. Move on to set all functions.
Set all functions
Press the UP or DOWN button to select all function settings.
[on] (use) is selected
Setting of functions
*
[F90] Setting of all functions completed Measurement mode
∗ : Setting of each function
Every time the SET button is pressed, the display moves to the next function in "Order of function settings".
Set by pressing UP and DOWN button.
For details of how to set each function, refer to the relevant setting of function section in this manual.
● Order of function settings
Order Function Applicable model
F0
Reference condition All models
Unit selection function Model with units selection function
F3 Select response time All models
F6 Fine adjustment of display value All models
F13 Setting for reverse display mode All models
F14 Zero cut-off setting All models
F16 Measurement display setting All models
F30 Setting of accumulated value hold All models
F40 Setting of standby function All models
F41 Setting of Force AMS mode All models
F80 Set display OFF mode All models
F81 Security code All models
[oFF] (not use) is
selected
Press the SET
button to set.
Return to function
selection mode.
Press the
SET button
for 2 seconds
or longer.