SMC Networks 7500A/VCP - annexe 1, Руководство по управлению

Страница: 202 / 316

C
OMMAND
L
INE
I
NTERFACE
3-66
Default Setting
9600 bps
Command Mode
Line Configuration
Command Usage
Set the speed to match the baud rate of the device connected to the
serial port. Some baud rates available on devices connected to the
port might not be supported. The system indicates if the speed you
selected is not supported.
Example
To specify 57600 bps, enter this command:
stopbits
Use this command to set the number of the stop bits transmitted per byte.
Use the no form to restore the default setting.
• 1 - One stop bit
• 2 - Two stop bits
Default Setting
1 stop bit
Command Mode
Line Configuration
Example
To specify 2 stop bits, enter this command:
Console(config-line)#speed 57600
Console(config-line)#
Console(config-line)#stopbits 2
Console(config-line)#