C
OMMAND
L
INE
I
NTERFACE
3-4
You can enter commands as follows:
•
To enter a simple command, enter the command keyword.
•
To enter multiple commands, enter each command in the required
order. For example, to enable Privileged Exec command mode and
display the startup configuration, enter:
Console>
enable
Console#
show startup-config
•
To enter commands that require parameters, enter the required
parameters after the command keyword. For example, to set a
password for the administrator, enter:
Console(config)#
username admin password 0
super
Minimum Abbreviation
The CLI will accept a minimum number of characters that uniquely
identify a command. For example, the command “configure” can be
entered as
config
. If an entry is ambiguous, the system will prompt for
further input.
Command Completion
If you terminate input with a Tab key, the CLI will print the remaining
characters of a partial keyword up to the point of ambiguity. In the
“configuration” example, typing
con
followed by a tab will result in
printing the command up to “
configure
.”
Getting Help on Commands
You can display a brief description of the help system by entering the
help
command. You can also display command syntax by using the “?”
character to list keywords or parameters.
Содержание 7500A/VCP - annexe 1
