C
OMMAND
L
INE
I
NTERFACE
3-76
Example
The following shows how to configure broadcast suppression at 1000
packets per second:
show interfaces status
Use this command to display the status for an interface.
Syntax
show interfaces status
interface
interface
•
ethernet
unit
/
port
-
unit
- This is device 1.
-
port
- Port number.
•
port-channel
channel-id
(Range: 1-6)
•
vlan
vlan-id
(Range: 1-4094)
Default Setting
none
Command Mode
Normal Exec, Privileged Exec
Example
Console(config)#interface ethernet 1/5
Console(config-if)#switchport broadcast packet-rate 1000
Console(config-if)#
Console#$
Console#show interfaces status ethernet 1/11
Information of Eth 1/11
Basic information:
Port type: 100tx-efm
Mac address: 00-30-f1-4d-1e-8a
Configuration:
Name:
Port admin: Up
Speed-duplex: Auto
Capabilities: 10half, 10full, 100half, 100full,
Broadcast storm: Enabled
Broadcast storm limit: 500 packets/second
Flow control: Disabled
Lacp: Disabled
Current status:
Link status: Down
Operation speed-duplex: 100full
Flow control type: None
Console#
Содержание 7500A/VCP - annexe 1
