S
WITCH
M
ANAGEMENT
1-6
Setting Passwords
Note:
If this is your first time to log into the CLI program, you should
define new passwords for both default user names using the
“username” command, record them and put them in a safe place.
Passwords can consist of up to 8 alphanumeric characters and are case
sensitive. To prevent unauthorized access to the switch, set the passwords
as follows:
1. Open the console interface with the default user name and password
“admin” to access the Privileged Exec level.
2. Type “configure” and press <Enter>.
3. Type “username guest password 0
password
,” for the Normal Exec
level, where
password
is your new password. Press <Enter>.
4. Type “username admin password 0
password
,” for the Privileged Exec
level, where
password
is your new password. Press <Enter>.
Username: admin
Password:
CLI session with the host is opened.
To end the CLI session, enter [Exit].
Console#configure
Console(config)#username guest password 0 [password]
Console(config)#username admin password 0 [password]
Console(config)#
Содержание 7500A/VCP - annexe 1
