SMC Networks 7500A/VCP - annexe 1, Руководство по управлению

Страница: 104 / 316

C
ONFIGURING THE
S
WITCH
2-76
Web Interface
Click Priority/IP Priority Status and then select Enabled.
Click IP Port Priority from the Priority menu. Select the port or trunk. To
add an IP port, type the port number in the IP Port box and the new CoS
value in the Class of Service box, then click “Apply.” To delete an IP port
setting, select the entry in the Current IP Port Table, then click “Remove
IP Port.”
Command Line Interface
The following example shows IP Port 80 mapped to CoS value 0 for
ethernet port 1.
Console(config)#map ip port 3-130
Console(config)#interface ethernet 1/5
Console(config-if)#map ip port 80 cos 0
3-131
Console(config-if)#end
Console# show map ip port ethernet 1/5
3-135
TCP port mapping status: enabled
Port Port no. COS
--------- -------- ---
Eth 1/ 5 23 0
Eth 1/ 5 80 0
Eth 1/ 5 1020 6
Console#