S
YSTEM
M
ANAGEMENT
C
OMMANDS
3-29
Command Usage
The encrypted password is required for compatibility with legacy
password settings (i.e., plain text or encrypted), when reading the
configuration file during system bootup or when downloading the
configuration file from a TFTP server. There is no need to manually
configure encrypted passwords.
Example
This example shows how to set the access level and password for a user.
enable password
After initially logging onto the system, you should set the administrator
(Privileged Exec) and guest (Normal Exec) passwords. Remember to
record them in a safe place. Use the
enable password
command to
control access to Privileged Exec mode from the Normal Exec mode. Use
the
no
form to reset the default password.
Syntax
enable password
[
level
level
] {
0
|
7
}
password
no enable password
[
level
level
]
•
level
level
- Level for which the password applies.
• The device has two predefined privilege levels: 0: Normal Exec,
15: Privileged Exec. Only level 15 (Privileged Exec) is valid for
this command.
• {
0
|
7
} - 0 means plain password, 7 means encrypted password.
•
password
- password for this privilege level.
Default Setting
• The default is level 15.
• The default password is “super.”
Command Mode
Global Configuration
Console(config)#username bob access-level 15
Console(config)#username bob password smith
Console(config)#
Содержание 7500A/VCP - annexe 1
