M
ULTICAST
C
ONFIGURATION
2-91
Command Line Interface
This example displays all the known multicast services supported on
VLAN 1, along with the ports propagating the corresponding services.
The type field shows whether this entry was learned dynamically or was
statically configured.
Adding Multicast Addresses to VLANs
Multicast filtering can be dynamically configured using IGMP Snooping
and IGMP Query messages as described in “Port Trunk Configuration”
on page 2-78. For applications that require tighter control, you may need
to statically configure a multicast service on the switch.
First add all the ports attached to participating hosts to a common VLAN,
and then assign the multicast service to that VLAN group.
Command Usage
•
Static multicast addresses are never aged out.
•
When a multicast address is assigned to a specific VLAN, the
corresponding traffic can only be forwarded to ports within that
VLAN.
Fields and Attributes
•
Interface
– Activates the Port or Trunk scroll down list.
•
VLAN ID
– Selects the VLAN to propagate all multicast traffic
coming from the attached multicast router/switch.
•
Multicast IP
– The IP address for a specific multicast service.
•
Port
or
Trunk
– Specifies the interface attached to a multicast router.
Console#show bridge 1 multicast vlan 1
3-117
VLAN M'cast IP addr. Member ports Type
---- --------------- ------------ -------
1 224.0.0.12 Eth1/12 USER
1 224.1.2.3 Eth1/12 IGMP
Console#
Содержание 7500A/VCP - annexe 1
