S
PANNING
T
REE
C
OMMANDS
3-89
bridge max-age
Use this command to configure the spanning tree bridge maximum age
globally for this switch. Use the
no
form to restore the default.
Syntax
bridge
bridge-group
max-age
seconds
no bridge
bridge-group
max-age
•
bridge-group
- Bridge group index (bridge 1.)
•
seconds
- Time in seconds. (Range: 6-40 seconds)
• The minimum value is the higher of 6 or
[2 x (hello-time + 1)].
• The maximum value is the lower of 40
or [2 x (forward-time - 1)].
Default Setting
20 seconds
Command Mode
Global Configuration
Command Usage
This command sets the maximum time (in seconds) a device can wait
without receiving a configuration message before attempting to
reconfigure. All device ports (except for designated ports) should
receive configuration messages at regular intervals. Any port that ages
out STA information (provided in the last configuration message)
becomes the designated port for the attached LAN. If it is a root
port, a new root port is selected from among the device ports
attached to the network.
Example
Console(config)#bridge 1 max-age 40
Console(config)#
Содержание 7500A/VCP - annexe 1
