R
ATE
L
IMIT
C
OMMANDS
3-163
Rate Limit Commands
This function allows the network manager to control the maximum rate
for traffic transmitted or received on a port. Rate limiting is configured on
ports at the edge of a network to limit traffic into or out of the network.
Traffic that falls within the rate limit is transmitted, while packets that
exceed the acceptable amount of traffic are dropped.
Rate limiting can be applied to individual ports. When a port is configured
with this feature, the traffic rate will be monitored by the hardware to
verify conformity. Non-conforming traffic is dropped, conforming traffic
is forwarded without any changes.
rate-limit
(global)
Use this command in global configuration mode to set the rate limit. Use
the
no
form of this command to return to the default setting.
Syntax
rate-limit input
no rate-limit input
Default Setting
None
Command Mode
Privileged EXEC
Example
Related Commands
rate limit (interface)
Console#config
Console(config)#rate-limit input
Console(config)#
Содержание 7500A/VCP - annexe 1
