C
OMMAND
L
INE
I
NTERFACE
3-150
efm define user-profile
Use this command to configure downstream rate, upstream rate and
interleave depth for user-specified profiles.
Syntax
efm define user-profile
[
profile number
] [
downstream rate
]
[
upstream rate
]
[
interleave depth
]
•
profile number
– user-specified profiles can be user-1 or user-2
•
downstream rate
– Rate of data transmission from the switch to the
CPE. (Range 1 Mbps - 15 Mbps)
•
upstream rate
- Rate of data transmission from the CPE to the
switch. (Range 1 Mbps - 15 Mbps)
•
interleave depth
- Determines the degree of protection of the data
signal against impulse noise provided by interleaving.
(Values: 2 or 16. 16 specifies maximum protection)
Default Setting
0 - interleaving is disabled
Command Mode
Global Configuration
Command Usage
User-specified EFM profiles can be assigned to all the VDSL ports by
using the
efm profile global
command, or to specific VDSL ports by
using the
efm profile command
.
Example
The following example shows user-profile 1 configured to a
downsteam rate of 15 Mbps, an upstream rate of 5 Mbps, and an
interleave depth of 2.
Related Commands
efm profile global
efm profile
Console(config)#efm define user-profile 1 15 5 2
Console(config)#
Содержание 7500A/VCP - annexe 1
