VDSL C
OMMANDS
3-153
Example
The following example shows how to enable/disable RDL on VDSL
port 1.
efm flow-control
Use this command to configure the maximum speed of transmission of
data from a specific switch VDSL port to the CPE.
Syntax
efm flow-control
flow-control-value
flow-control-value
- from 0 to the maximum transmission rate
available. 0 means the port is disabled. The maximum transmission
rate is determined by the physical link and the EFM profile selected
(see page 3-147.)
Default Setting
The maximum transition rate available. This is determined by the
physical link and the EFM profile selected (see page 3-147.)
Command Mode
Interface Configuration
Example
The following example shows VDSL port 1 configured to a maximum
transmission rate of 1 Mbps.
Related Commands
rate-limit (global)
rate-limit
Console(config)#interface ethernet 1/1
Console(config-if)#efm rdl
Console(config-if)#no efm rdl
Console(config-if)#
Console#config
Console(config)#interface ethernet 1/1
Console(config-if)#efm flow-control 1
Console(config-if)#
Содержание 7500A/VCP - annexe 1
