Sitex SP38 Autopilot, Инструкция по установке и эксплуатации

Страница: 85 / 162

Sitex SP38 Installation and Operation Basic Operation
Document PN 29010101 V2r0
- 8 4 -
For “Faulty Head”
The “NO COMMAND HEAD” alert identifies a connection failure to the SPU upon initial start-
up. The “Compass error” alert occurs when the SPU can’t identify the Compass source. To
correct either of these alerts, do the following:
1. Press “Enter” (brought up by clicking/single press the TURN knob) to
acknowledge the alarm message.
2. Press and hold the “CMD” button to take control. The “NO COMMAND HEAD”
and “Compass Error” messages will disappear.
NMEA 2000 Compass to system
As explained in First time power up in 4.1.4 System Setup, the autopilot will automatically link
to a compass in the network. If for any reason the system does not link to a NMEA 2000 compass
device, you can manually select the NMEA 2000 compass device using the Main MENU, see below
for guidance.