Sitex SP38 Autopilot, Инструкция по установке и эксплуатации

Страница: 130 / 162

Sitex SP38 Installation and Operation
Document PN 29010101 V2r0
- 12 9 -
Appendix 2
NON-NMEA2000 Sitex Product Support
NMEA0183 Compass (GNSS G1/G2/G2B):
PN 112200 12 or 112200 13 (G2) –
NMEA0183 model with 15 or 30 metre cable
PN
112200 14 or 112200 15 (G2B) –
NMEA0183 model with 15 or 30 metre cable
The Sitex GPS Compasses are state-of-the-art devices which can provide accurate 2D
Heading and Position data to autopilots, sonar, chart-plotters, AIS transponders.
Figure 71 – GNSS G2 GPS Compass
The SP38 has the ability to accept Navigation Data and information formatted in NMEA 0183
standard (version 3.00.
Many marine electronics devices (such as digital compasses, GPS receivers, chart-plotters, and
electronic charting systems, to name a few have outputs complying with NMEA 0183.
Two such devices can be connected directly to the SP38 ’s SPU, by wiring them into the plug
mated to the receptacle labelled J6 – NAV I/O . The signals are utilized by configuring NAV1 &
NAV2 through DOCKSIDE Setup (select “NMEA” under Compass in DOCKSIDE Setup.
The SPU also has an NMEA0183 output; it transmits the autopilot’s real-time Heading Data and
status information, for use by devices such as a radar display, a chart plotter or a navigation
program on a PC.
Refer to Appendix 1 for more information on the NMEA 0183 sentences accepted and sent
by the system.
Figure 72 – Typical NMEA 0183 Connections
Appendices