Sirio Antenne SRS1351 - I, Руководство пользователя

Страница: 67 / 134

67
The clearance test does
not work
(light on) a) Fault in the electronic card.
b) Solenoid valve EV6 blocked
in closing position. a) Replace electronic card.
b) See "Maintenance" section.
With the clearance test
OFF, the light does not
come on when the
MODE button is ressed a) Main switch in "0" position.
b) Transformer fuse or general
protection fuses broken
(installed by the user).
c) Fault in the electrical system.
d) Fault in the electronic card.
e) Fault in the keyboard.
f) Lamp interrupted. a) Place switch to position "1".
b) Replace interrupted fuses. If a fuse
breaks again, find out the cause.
c) Check that connections and
components works
properly (buttons, remote switch, heat
switch, transformer).
d) Replace electronic card.
e) Replace keyboard.
f) Replace lamp.
Clearance test
operation button is
pressed but the plates
do not move correctly a) Fault in the keyboard.
b) Fault in the electronic card.
c) Solenoid valve EV7 blocked. a) Replace keyboard.
b) Replace electronic card.
c) See "Maintenance" section.
OFF button pressed,
the clearance test or
the light are not
disabled a) Fault in the keyboard.
b) Fault in the electronic card. a) Replace keyboard.
b) Replace electronic card.