Simrad TV80, Справочное руководство

Страница: 110 / 306

108
406388/B
Deleting and removing sensors
Topics
Removing one or more sensors from the system, page 108
Temporarily removing a sensor from the presentation, page 109
Removing one or more sensors from the system
You can remove any sensor and its configuration associated to a specific gear from the
Installation
dialog box. You can delete one or more sensors at the same time.
Context
The
Installation
dialog box can be considered a “management center”.It accesses the main
pages and dialog boxes required to set up the TV80 for operational use. The TV80 is as
flexible as your fishing scenario. Depending on the fishing operation, you may need to work
with different gears, add or remove sensors, change the location of the sensors or even
receive different measurements.
Procedure
1 On the
Setup
menu, select
Installation
.
Observe that the
Installation
dialog box opens.
2 In the
Sensor list
, select the sensor or sensors you want to remove.
You can select one sensor by clicking on it. If you want to select more than one sensor,
click on all of them or drag the cursor. You can easily identify the selected sensors
because of the red frame around it.
3 At the bottom of the
Sensor list
, select
Remove sensor
.
4 Select
Yes
.
Result
The selected sensors will no longer be installed for that specific gear system.
Simrad TV80 Reference Manual