Simrad TV80, Справочное руководство

Страница: 106 / 306

104
406388/B
6 Repeat these steps for the next sensor.
Result
The new sensor appears on the
Sensor List
page.
The
Sensor List
page presents a table with all the catch monitoring sensors that have been
added to the system. You can see if they are currently in use or disabled. You can also
see relevant information about the sensors, such as type, receiver in use, communication
channel, and where they are placed on the fishing gear.
Related topics
Add New Sensor dialog box, page 227
PX TrawlEye Configurator dialog box, page 229
PX MultiSensor mk2 Configurator dialog box, page 236
Adding a new sensor that does not need configuration prior to use
When you want to put a new catch monitoring sensor to use, you need to add it to the system.
Prerequisites
In order to read catch monitoring sensor data, you must first connect one or more receiver
units to the Processor Unit. Each of these receivers can read the information transmitted by
the sensors placed on your gear.
This procedure assumes that a suitable receiver unit has been connected to the Processor
Unit, and that all relevant communication parameters have been defined.
Context
Catch monitoring sensors are delivered from Kongsberg Maritime AS readily set up with
common default settings. When required, each individual sensor may be configured to
specify its communication channel and which measurements to make.
Note
If your new sensor has already been configured, you do not need to repeat the configuration
process to use it. If you wish to use older sensors (not PX family), these must be configured
using their dedicated applications before you add them.
The
Add New Sensor
dialog box starts a "wizard" that permits you to select the specific catch
monitoring sensor you want to put to use. If necessary, the "wizard" provides the necessary
configuration functionality. With the
Select Sensors
dialog box you are adding previously
configured sensors to the TV80.
The number of sensors you can add depends on your hardware configuration.
Simrad TV80 Reference Manual