Simrad TV80, Справочное руководство

Страница: 105 / 306

406388/B
103
The number of sensors you can add depends on your hardware configuration.
• The PI50 Receiver Unit supports all PI and PX MultiSensors and maximum six
measurements.
• The PI60 Receiver Unit supports all PI and PX MultiSensors and maximum ten
measurements.
• The SR15 Receiver Unit supports the PX MultiSensor mk2, PX Universal, PX
MultiCatch and PX TrawlEye sensors, and maximum 80 measurements.
• The SR70 Receiver Unit supports the PX MultiSensor mk2, PX Universal, PX
MultiCatch and PX TrawlEye sensors, and maximum 80 measurements.
Procedure
1 Open the
Setup
menu.
2 On the
Setup
menu, select
Installation
.
Observe that the
Installation
dialog box opens.
3 At the bottom of the
Sensor list
page, select
Add New Sensor
.
The
Add New Sensor
dialog box opens. In the first dialog box, the following options
are provided.
4 Select
Yes
if you have a new sensor that needs to be configured before use.
a In the
PX Sensor Configurator
dialog box, select communication port and sensor
type, then select
Connect
.
b In the relevant configuration dialog box, select the operational parameters to suit
your preferences and fishing gear setup.
c Select
Program Sensor
to transfer the chosen parameters to the sensor.
d Disconnect the sensor from the interface cable and the Processor Unit.
e Select
Close
to close the dialog box.
5 Select
No
if the sensor is mounted on the fishing gear, if it is a PI/ITI type sensor or if
the sensor data is received via the FS cable based system and you still need to configure
the system and the receiver.
a Observe that the
Select Sensors
dialog box opens.
b Select the measurements you wish to make with the new sensor, and place it on
the gear.
c Define the sensor parameters.
d Select
Save and Close
to save your choices and close the dialog box.
Operating procedures