Simrad SC90, Руководство по установке

Страница: 198 / 544

196
419050/B
Cable Type From/To Minimum requirements
Control cable From Processor Unit to
Operating Panel C12
This is a standard commercial USB data cable. It has a quadratic USB connector in the
Operating Panel end (B-plug), and rectangular USB connector in the Processor Unit
end (A-plug).
C13 Serial cable From Processor Unit to external
device(s) 2 x 4 x 0.5 mm²
C14
Ethernet cable From Processor Unit to local
area network (LAN) CAT5-E STP (Shielded Twisted
Pair)
C15-19 Not used
Sonar room cables
Cable
Type
From/To Minimum requirements
Ground cable From hull unit mounting flange
to vessel ground C20
A dedicated grounding cable is provided with the hull unit. One end of the cable is
already fastened to the hull unit mounting flange. The other end must be connected to
vessel ground close to the hull unit. The length of the cable is 2 metres.
Control cable From Motor Control Unit to gate
valve and Gate Valve Control
Unit C21
This connection is only required if the optional hydraulic gate valve is installed. This
interface prevents the transducer to be lowered while the gate valve is closed. It also
prevents the gate valve from closing when the transducer is lowered.
C22 AC power cable From Transceiver Unit to
uninterruptible power supply
(UPS) 2 x 1.5 mm² + Ground
C23 AC power cable From uninterruptible power
supply (UPS) to AC power
outlet 2 x 1.5 mm² + Ground
C24 AC power cable From Power Supply Unit to
uninterruptible power supply
(UPS) 2 x 1.5 mm² + Ground
C25 DC power cable From Power Supply Unit to
Transceiver Unit
C26 Ethernet cable From Transceiver Unit to Motor
Control Unit CAT5-E STP (Shielded Twisted
Pair)
C27
Transducer cable From Transceiver Unit to
transducer
C28 AC power cable From Motor Control Unit to AC
power 4 x 2.5 mm²
C29 Ethernet cable From Transceiver Unit to Power
Supply Unit CAT5-E STP (Shielded Twisted
Pair)
Simrad SC90 Installation Manual