SILICYCLE MiniBlock Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 60

background image

SiliCycle MiniBlock® User Guide

24

www.SiliCycle.com | [email protected]

Solid-phase resin support is added to SiliCycle MiniBlock Reaction Tubes prior to closing down the SiliCycle MiniBlock top.
In simple practice, measured quantities of resin are sequentially transferred to individual tubes.

The Resin Dispenser, capable of accurately dispensing various resin quantities is available (13822001). The SiliCycle MiniBlock Resin Dispenser is

designed to evenly dispense resin to 48 Reaction Tube positions simultaneously. (See section Appendix B: Resin Dispenser: Operating Instructions for

details of Resin Dispenser Operation.)

Figure 25: Dispensing Plate

SiliCycle MiniBlocks can be used to cleave reaction products from resins contained in IRORI Kans.
The SiliCycle MiniBlock is designed to accommodate IRORI Microkans, MiniKans (4 mL Reaction Tubes) and MacroKans (10 mL Reaction Tubes).
The Kans can be scanned in manually and placed into Reaction Tubes. For unattended operation, the IRORI AutoSort™ 10KX can be used to

automate Kan scanning and sorting into SiliCycle MiniBlocks.

Resin conditioning and swelling prior to synthesis can be readily accomplished in a SiliCycle MiniBlock. See section 5 Washing, Purification and

Product Collection for information regarding washing operations on the SiliCycle MiniBlock.

For oxygen or moisture sensitive reactions, the Inert Atmosphere Manifold should be used to purge out all Reaction Tubes. Open the bottom

SiliCycle MiniBlock valve and purge for a suitable time to assure an inert reaction environment. Close the bottom valve before proceeding.
Alternatively, argon can be used to displace air in the Reaction Tubes. The Inert Atmosphere Manifold with positive argon flow is placed loosely over

the Reaction Tubes (without clamping) for a suitable period. The side spring clamps are then secured down simultaneously on the Inert Atmosphere

Manifold and argon pressure is adjusted (using the bubbler) to assure positive pressure.

Beveled End

Slot (

Closed Position

)

Large Alignment Pin

Quick Release Pin

Spring Loaded Rectangle

Dispensing Plate

(

Color Coding

Must Face Up

)

Hard Stop

«
...
22
23
24
25
26
...
»

Содержание MiniBlock





























































Отзывы:

Нет отзывов

Похожие инструкции для MiniBlock

Бренд: Landoll Страницы: 6

Бренд: ParaBody Страницы: 9

Бренд: ParaBody Страницы: 3

Бренд: MacDon Страницы: 45

Бренд: H&S Страницы: 30

Бренд: Campbell Страницы: 2

Бренд: IDEAL Networks Страницы: 60

Бренд: IceCure Страницы: 104

Бренд: Labelmate Страницы: 61

Бренд: Laser Страницы: 2

Бренд: Lars Thrane Страницы: 50

Бренд: Rain-Flo Irrigation Страницы: 16

Бренд: Mackie Страницы: 18

Бренд: Mackie Страницы: 2

Бренд: Mackie Страницы: 8

Бренд: Mackie Страницы: 7

Бренд: Major tech Страницы: 12

ENET-232 Series

Бренд: National Instruments Страницы: 105

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды