Siemens SITRANS FC330 Скачать руководство пользователя страница 50

Страница: 50 / 280

4.2.2.2

Orientation of the sensor

Flow direction

The calibrated flow direction is indicated by the arrow on the sensor. Flow in this direction will

be indicated as positive by default. The sensitivity and the accuracy of the sensor do not change

with reverse flow.
The indicated flow direction (positive/negative) is configurable.

CAUTION

Accurate measurement
The sensor must always be completely filled with process media in order to measure

accurately.

NOTICE
Orienting the sensor
To avoid water or moist ingress, transmitters should be oriented with cable entrances aiming

downwards.

Installing/mounting
4.2 Installation instructions

SITRANS FC330

Operating Instructions, 01/2019, A5E44030648-AB

Содержание SITRANS FC330

























































































































































































































































































Результаты поиска

Содержание SITRANS FC330

Отзывы:

Siemens SITRANS FC330, Руководство по эксплуатации, Страница: 50 / 280

Результаты поиска

Содержание SITRANS FC330

Отзывы: