Siemens SITRANS FC330 Скачать руководство пользователя страница 275

Страница: 275 / 280

Certificates and support

E.1

Certificates

You can find certificates on the Internet at Industry online support portal (

http://

www.siemens.com/processinstrumentation/certificates

) or on an included DVD.

Certification documents including calibration report are supplied with each sensor included on

the SensorFlash. Material, pressure test, and factory conformance certificates are optional at

ordering.

Note
EAC declaration
The EAC declaration is available on the SensorFlash SD card delivered with the device.

E.2

QR code label

A QR code label can be found on the device. With the use of a smart phone, the QR code

provides a direct link to a website with information specific to the device, such as manuals,

FAQs, certificates, etc.

E.3

Technical support

If this documentation does not provide complete answers to any technical questions you may

have, contact Technical Support at:
● Support request (

http://www.siemens.com/automation/support-request

)

● More information about our Technical Support is available at

Technical Support (

http://www.siemens.com/automation/csi/service

)

Internet Service & Support

In addition to our documentation, Siemens provides a comprehensive support solution at:
● Service & Support (

http://www.siemens.com/automation/service&support

)

SITRANS FC330

Operating Instructions, 01/2019, A5E44030648-AB

275

Содержание SITRANS FC330

























































































































































































































































































Результаты поиска

Содержание SITRANS FC330

Отзывы:

Siemens SITRANS FC330, Руководство по эксплуатации, Страница: 275 / 280

Результаты поиска

Содержание SITRANS FC330

Отзывы: