Siemens SiPass integrated Скачать руководство пользователя страница 51

Страница: 51 / 66

Controller Event Tasks

Commands

A6V11144326

51 | 66

Type

Command

Description

Set mode “Authorization

–

Card Only”

Set mode “Authorization

–

Card + PIN”

Anti-Passback

Area

Reset Count

Resets the current count for the anti-

passback area to zero.

Override Mode

Override the selected area with a specific

mode.

Restore Mode

Restores the configured Anti-Passback

mode.

Controller

Turn Siren On

If a siren has been connected to the ACC,

it will be activated.

Turn Siren Off

If a siren has been connected to the ACC

and is currently active, it will be de-

activated.

Device

Device Reset

A device has been reset.

Report all inputs

Reports all inputs on a device.

Card Format Override

This Controller Event Task is specifically

for Legacy Asco RIM devices. For further

details regarding this event task, please

contact the Technical Support Team.

Door Interlocking Disable Door Interlocking Disable Door Interlocking.

Restore Door

Interlocking

Restore Door Interlocking.

Floor

Bank Floor Secure

Secures the specified elevator floor (for all

elevators within the same bank).

Bank Floor Unsecure

Unsecures the specified elevator floor (for

all elevators within the same bank).

Bank Floor Enable

Enables the specified elevator floor (for all

elevators within the same bank).

Bank Floor Disable

Disables the specified elevator floor (for all

elevators within the same bank).

Return to Time Schedule Returns the programmed access control for

the specified floor.

Cancel Permanent

Action

Any current Permanent Command or Event

Task, or Access/Internal Action operating

on the floor will be cancelled. The next

Control State in the Control State Queue

will take effect.

Input Point

Disable

Disables the selected input point.

Enable

Enables the selected input point.

Return to Time Schedule

Control

The output will return to normal Time

Schedule control.

Cancel Permanent

Action

Any current Permanent Command or Event

Task, or Access/Internal Action operating

on the target will be cancelled. The next

Control State in the Control State Queue

will take effect.

Содержание SiPass integrated



































































Результаты поиска

Содержание SiPass integrated

Отзывы:

Siemens SiPass integrated, Справочное руководство, Страница: 51 / 66

Результаты поиска

Содержание SiPass integrated

Отзывы: