Siemens SiPass integrated Скачать руководство пользователя страница 15

Страница: 15 / 66

Alarm Class

A6V11144326

15 | 66

Type

Status

Description

Workgroup Capacity

Exceeded

The number of cardholders in the area from

a Workgroup has exceeded the maximum for

that Workgroup.

Workgroup Capacity Not

Full

The number of cardholders in the area from

a Workgroup has not reached the maximum

for that Workgroup.

Workgroup Capacity

Empty

The number of cardholders in the area from

a Workgroup is zero.

Capacity Not Empty

The area is no longer empty.

Workgroup Capacity Not

Empty

The number of cardholders in the area from

a Workgroup is no longer zero.

Bus

Normal (bus alive)

The bus is communicating with the server.

Alarm (bus down)

The bus is not communicating with the

server.

Camera

Acknowledged

The communication link between the camera

switcher and the monitor has been restored.

Video Normal

The communication to the camera is

operating normally.

Motion Normal

The camera has acknowledged that there is

movement in the area and has raised a

normal alarm.

Video Loss

The communication link between the camera

switcher and the monitor has been lost.

Motion Alarm

The camera has detected movement and

has raised an alarm.

Device

Communication Back

The device has re-established

communication with the server.

Communication Lost

The device has lost communication with the

server.

Door

Interlocking

Interlocking Operational

Door Interlocking is enabled.

Interlocking Disabled

Door Interlocking is disabled.

Interlocking Alarm

Door Interlocking is in an alarm state.

Flag

Flag State False

The flag has been set to false

Flag State True

The flag has been set to true

Floor

Floor security on

The floor has been secured.

Floor security temp on

The Floor has been temporarily secured.

Floor security off

The Floor has been unsecured

Floor emergency stop

The Emergency Stop Button inside the

elevator has been activated.

Floor security temp off

The Floor has been temporarily unsecured.

Group

Normal

The group is in a normal state.

Alarm

The group is in an alarm state. The group

alarm conditions are established in the

Group

dialog.

Содержание SiPass integrated



































































Результаты поиска

Содержание SiPass integrated

Отзывы:

Siemens SiPass integrated, Справочное руководство, Страница: 15 / 66

Результаты поиска

Содержание SiPass integrated

Отзывы: