Siemens SiPass integrated Скачать руководство пользователя страница 36

Страница: 36 / 66

Host event tasks
Targets / Commands

36 | 66

A6V11144326

Target

Command

Description

Unblock Door

Returns a blocked door to its normal

programmed mode of operation.

Request Access

Mode

Request a current access mode.

Set mode “No Dual

Custody”

Disables Dual Custody for the access point.

Set mode “Standard

Dual

Custody”

Sets the access point to Standard Dual Custody

Mode.

Set mode

“Supervisory Dual

Custody”

Sets the access point to Supervisory Dual

Custody Mode.

Restore Access Mode

configuration

Restores the access mode that is stored in the

database.

Set “No Additional

Access”

Sets the additional access for the selected

access point to No Additional Access.

Set “PIN as Card”

additional access

mode

Sets the additional access for the selected

access point to PIN as Card.

Set “Daily Code”

additional access

mode

Sets the additional access for the selected

access point to Daily Code.

Restore additional

access mode

Returns the access point to the normal additional

access operation mode defined in the

Components screen.

Unlock Door, Override

Door Interlocking

Unlocks the door and ignores any Door

Interlocking configuration.

Allow Access,

Override Door

Interlocking

Allows access and ignores any Door Interlocking

configuration.

Intrusion Control

–

Enable

Enable Intrusion Control on the selected access

point.

Intrusion Control

–

Disable

Disable Intrusion Control on the selected access

point.

Intrusion Control

–

Restore Config

Restore Intrusion Control to whatever is

configured.

Set mode

“Authorization –

Card

Only”

Enables “Authorization –

Card Only” operation at

an access point. Refer to Operational modes for

more information.

Set mode

“Authorization –

Card

+ PIN”

Enables “Authorization –

Card + PIN” operation

at an access point. Refer to Operational modes

for more information.

Access Point

Group

Same as access

points

See “Access Point”

Actionable

Report

Not applicable

Performs the default actions that were configured

for the report that appears in the Report field.

Anti-Passback

Area

Forgive

Forgives a single cardholder.
Enter the card number of the forgiven cardholder

into the Data field.

Forgive all

Forgives all cardholders currently in the area.

Содержание SiPass integrated



































































Результаты поиска

Содержание SiPass integrated

Отзывы:

Siemens SiPass integrated, Справочное руководство, Страница: 36 / 66

Результаты поиска

Содержание SiPass integrated

Отзывы: