Siemens SiPass integrated Скачать руководство пользователя страница 31

Страница: 31 / 66

Host event tasks

Sources

A6V11144326

31 | 66

Source

State (trigger)

Description

Workgroup Capacity

Not Full

The number of cardholders in the area from a

Workgroup has not reached the maximum for

that Workgroup.

Anti-Passback

Area Point

Group

Same as Access

Points

See Above

Apogee Control Trig. ID

A host event task is triggered when a message is

received from the Apogee Control corresponding

to the Apogee Trigger ID.

Bus Driver

Bus Driver Alive

A host event task is triggered when the bus

driver operating the CCTV interface is restored.

Bus Driver Down

Driver A host event task is trig-gered when the

bus driver operating the CCTV interface goes

down

Camera Point

Acknowledged

The link between the camera switcher and the

monitor is working.

Motion Alarm

A motion alarm has been gener-ated by the

camera.

Motion Normal

A motion normal has been generated by the

camera.

Video Loss

A host event task is triggered when the live video

feed from a camera has been lost.

Video Normal

Video feed from the camera is restored.

Camera Point

Group

Alarm

A host event task is triggered when a camera

point group enters the alarm state.

Normal

A host event task is triggered when a camera

point group returns to the normal state.

Database

Synchronization

failed

A host based event task is triggered when the

database synchronization process has failed.

Database

Synchronization OK

A host based event task is triggered when the

database synchronization process has

succeeded.

Door Interlocking Interlocking Alarm

Door Interlocking alarm state.

Interlocking Disabled Door Interlocking is disabled.

Interlocking

Operational

Door Interlocking is enabled.

External Point

Acknowledged

An event is triggered when an external point is

acknowledged at the originating server.

Alarm

An event is triggered when an External point

(source point or area node) enters an alarm state

and that information is sent to SiPass integrated

by the exter-nal application.

Normal

An event is triggered when an External point

(source point or area node) enters a normal state

and that information is sent to SiPass integrated

by the exter-nal application.

Floor Point

Alarm

An alarm state has been reported by the floor.

Содержание SiPass integrated



































































Результаты поиска

Содержание SiPass integrated

Отзывы:

Siemens SiPass integrated, Справочное руководство, Страница: 31 / 66

Результаты поиска

Содержание SiPass integrated

Отзывы: