Siemens SiPass integrated Скачать руководство пользователя страница 37

Страница: 37 / 66

Host event tasks

Targets / Commands

A6V11144326

37 | 66

Target

Command

Description

Reset Count

Resets the current count for the anti-passback

area to zero.

Override Mode

Override the selected area with a specific mode.

Restore Mode

Restores the configured Anti-Passback mode.

CCTV

Switch Camera to

Monitor

Switches the selected camera to display on the

specified monitor. Refer to the

CCTV User’s

Guide

for more information.

Run Pattern

Displays a pre-configured pattern on the

specified monitor. Refer to the

CCTV User’s

Guide

for more information.

Run Sequence

Displays a pre-configured sequence on the

specified monitor. Refer to the

CCTV User’s

Guide

for more information.

Run Preset

Displays a pre-configured preset on the specified

monitor. Refer to the

CCTV User’s Guide

for

more information.

Activate Alarm

Activates a pre-configured alarm on the specified

monitor. Refer to the

CCTV User’s Guide

for

more information.

Acknowledge Alarm

Displays a pre-configured alarm on the specified

monitor. Refer to the

CCTV User’s Guide

for

more information.

Database

Database Backup:

Data

Performs a backup of the SiPass integrated data

files.

Database Backup:

Binaries

Performs a backup of the SiPass integrated

binary files.

Database backup:

Historical

Performs a backup of the historical data.

Database Backup:

Runtime

Performs a backup of the runtime data.

Database Backup:

Full

Performs a complete SiPass integrated

Database backup.

Door

Interlocking

Disable

Disable Door Interlocking.

Restore

Restore Door Interlocking.

DVR

DVR Recording

Records the live image from the selected DVR

Camera for between 1 and 600 seconds.
Enter the desired recording time into the

Duration field in seconds.

DVR Operation

The DVR Client will appear displaying the live

image from the selected camera and preset.

DVR Camera

Positioning

Moves the selected DVR Camera to a predefined

position.

Floor point

Bank Floor secure

Secures the specified floor.

Bank Floor unsecure Unsecures the specified floor.

Cancel permanent

action

Cancels the last command for the elevator floor

and returns its operation to the programmed

operation.

Содержание SiPass integrated



































































Результаты поиска

Содержание SiPass integrated

Отзывы:

Siemens SiPass integrated, Справочное руководство, Страница: 37 / 66

Результаты поиска

Содержание SiPass integrated

Отзывы: