Siemens SiPass integrated Скачать руководство пользователя страница 47

Страница: 47 / 66

Controller Event Tasks

Sources

A6V11144326

47 | 66

Type

State (trigger)

Description

Door Opened

An event task is triggered when a door monitor

has registered that a door has been opened

for longer than the Input Delay time.

Door Tamper

An event task is triggered when a device has

registered that a supervised door monitor input

has been tampered with.

Input Alarm

An event task is triggered when an input point

has entered an alarm state.

Input Faulty

An event task is triggered when an input point

has become faulty.

Input Isolated

An event task is triggered when an input point

has been iso-lated.

Input Normal

An event task is triggered when an input point

has been re-stored to a normal state.

Input Physically

disabled at FLN

device

The input has been physically disabled by

setting jumpers on the device.

Input Physically

enabled at FLN

device

The Fire Override on the device has been

disabled physically.

Input Sealed

An event task is triggered when an input point

has been sealed.

Input Tamper

An event task is triggered when a device has

registered that a supervised input point has

been tampered with.

Input tamper or fault

cleared

The input tamper state has been cleared /

fixed.

Input Unsealed

Input has failed a seal check when arming an

Intrusion Area.

Pass back Tamper

An event task is triggered when a device has

registered that a supervised request-to-exit

input has been tampered with.

Pass back Trigger

An event task is triggered when a passback

input has been activated.

Intrusion Area

Alarm

An event task will be triggered when the

intrusion area enters an alarm state.

Armed

An event task will be triggered when the

specified intrusion area becomes armed.

Arming Action

Complete

An event task will be triggered when an

attempt has been made to arm a dependant

area, but not all areas to which it belongs have

been armed first.

Arming Failed

–

Input

X in Alarm

An event task will be triggered when the

arming of an intrusion area fails due to an

input that is currently in an alarm state.

Disarmed

An event task will be triggered when the

specified area has been disarmed.

Entry Delay Timer

Started

An event task will be triggered when the entry

delay timer has started.

Содержание SiPass integrated



































































Результаты поиска

Содержание SiPass integrated

Отзывы:

Siemens SiPass integrated, Справочное руководство, Страница: 47 / 66

Результаты поиска

Содержание SiPass integrated

Отзывы: